Article DirectoryJust another article directory

In this practice, you configure DNS server settings on Server2 so that you can install online MCTS certification Active Directory, and then uninstall Active Directory from the server.
Exercise 1: Fixing a DNS Configuration
In this exercise, you’ll incorrectly configure your DNS server settings for Server2. Then, you’ll attempt to install Active Directory on Server2. Finally, you’ll correct the DNS server settings so you can properly install Active Directory on Server2.
To fix a DNS configuration and install Active Directory
1.Log on to Server2 as Administrator.
2.Click Start, point to Control Panel, point to Network Connections, and then click Local Area Connection.
3.n the Local Area Connection Status dialog box, click Properties.
4.n the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click Properties.
5.Ensure DNS is not installed by clicking Start, pointing to Administrative Tools, and then checking for DNS in the tree.
6.n the Internet Protocol (TCP/IP) Properties dialog box, set Preferred MCTS benefits Server setting to 127.0.0.1.
7.Clear all IP Addresses in the Alternative DNS server setting box, and then click OK.
8.Log off Administrator.
9.Log on using the local administrator’s user name and password. In the Log On To Windows dialog box, ensure that you have the Log On To box set to SERVER2
(this computer). You may need to click Options in order to see the Log On To box.Click OK.
10. Click Start, and then click Run. Type dcpromo in the Open dialog box. Click OK.
11.When the Active Directory Installation Wizard starts, click Next to begin installing Active Directory.
12.Read the Operating System Compatibility page, and then click Next.
13.On the Domain Controller Type page, select Additional Domain Controller For An Existing Domain, and then click Next.
14.On the Network Credentials page, type the user name and password of the domain administrator account. Type contoso.com as the domain, and then click
Next.
15.You should see an Active Directory Installation Wizard message box indicating an error. The message box tells you that the domain controller for Contoso.com cannot be located. This is because your Preferred DNS server is incorrectly config?ured. Click Details to read more about this error, and then click OK.
16.On the Network Credentials screen, click Cancel to cancel the Active Directory installation, and then click Yes to confirm the cancellation.
17.To correct your DNS configuration, click Start, point to Control Panel, point to Network Connections, and then click Local Area Connection.
18.In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) and click Properties.
19.In the Internet Protocol (TCP/IP) Properties dialog box, set the Preferred DNS Server setting to the IP Address of Serverl. Click OK.
20.Click OK to close the Local Area Connection Properties dialog box.Install Active Directory on free Microsoft practice tests as described earlier in this exercise.

Read more on Fixing a DNS Configuration and Installing Active Directory…

Reasons to create more than one child domain under the forest root include the following MCTS benefits:
To meet required security policy settings that are linked to domains
To meet special administrative requirements, such as legal or privacy concerns
To optimize replication traffic
To retain Windows NT domains
To establish a distinct namespace
Make sure you know why using a dedicated root domain is important. Also, make sure you know the reasons for creating more than one child domain.
In the example, Contoso Pharmaceuticals requires stricter password requirements at the Chicago office, and there is a need to control replication traffic on the highly utilized Chicago-Kansas City network connection. In addition, the company plans to add a new office in Winnipeg, Canada within two years and anticipates having to address requirements of the government of Canada. Therefore, the Active Directory infrastructure designers have planned to implement a dedicated forest root domain and a domain for each of the company’s present locations; a total of five domains, as shown in online MCTS certification.
In addition to your assessment of the organization’s physical environment, you should also consider other infrastructures currently employed in the organization. For example, if your organization has already invested in a DNS structure, you should probably retain this structure. Similarly, if your organization is using a large Microsoft Exchange operation, you might want to base your domain structure on the same model. Before you change existing infrastructures, you must weigh the cost of the change against the potential benefits.
After analyzing your organization’s requirements, to create an OU plan you must define an OU structure. There are three reasons for defining an OU:
To delegate administration
To hide objects
To administer Group Policy
The primary reason for defining an OU is to delegate administration. Delegating administration is the assignment of IT management responsibility for a portion of the namespace, such as an OU, to an administrator, a user, or a group of administrators or users.
After you’ve determined the free Microsoft practice IT questions structure, you must place user accounts in the appro?priate OUs. The end result of an OU plan is a diagram of OU structures for each domain and a list of users in each OU.

Read more on Preparing for Active Directory Installation…

To configure and use administrative templates, open a online MCTS certification and navigate to the Administrative Templates section of the computer or user node of the GPO. The loca?tion is shown in Figure 11-10. Double-click a specific container in the template to change its settings. An open template container property page is shown in Figure 11-11. When the GPO is downloaded by the client, the settings will be applied. Admin?istrative template settings will be displayed in the Group Policy Management Console.
Consider the following security options, event log settings, restricted groups, services settings, and object permission settings in your security template design:
Consider limiting the number of logon credentials that are cached locally. These credentials are used when a domain controller is not available. Setting cached logon credentials to 0 prevents logon if no domain controller is available. This setting might be appropriate for highly sensitive client
computers, but it is not acceptable for laptop computers, as they will frequently be used where domain controllers are not available for logon. Consider setting sensitive laptops to 1. However, remember that the last logon is the one that will be MCTS benefits cached. If an administrator or technician logs on to the laptop for any reason, her or his credentials will be cached. Unless the authorized user of the laptop logs on and off before disconnecting from the network, the authorized user will not be able to log on to the laptop until it is connected to the network.
Consider enabling the security option Do Not Allow Storage Of Credentials Or .NET Passports For Network Authentication. If you enable this option, users will not be able to store Passport credentials and credentials used to log on to remote servers and workstations on their client computers, and therefore they will have to type them in each time they want to use them. Not storing cre?
dentials makes the access to applications, Web sites, databases, and so on safer.
However, when users have multiple passwords to remember, they are more likely to write them down, use a weak password, or both. You will have to evaluate which approach poses the most risk MCSE study guides free download for your organization.

Read more on How to Configure and Use Administrative Templates…

The Supplemental CD-ROM includes a practice test of 300 sample MCTS certification exam questions and an objective review with an additional 125 questions. Use these tools to reinforce your learning and to identify any areas in which you need to gain more experience before taking the exam
As an administrator, you must create a tree structure to reflect your company’s organization. See Lesson 3, “Planning the Active Directory Infrastructure Design,” to learn the basics of tree design. See Chapter 4, “Installing and Managing Domains, Trees, and Forests,” for details about creating trees.
Forests A forest is a grouping or hierarchical arrangement of one or more sepa-rate, completely independent domain trees. As such, forests have the following characteristics:
All domains in a forest share a common schema.
All domains in a forest share a common global catalog.
All domains in a forest are linked by implicit two-way transitive trusts.
Trees in a forest have different naming structures, according to their domains.
Domains in a forest operate independently, but the forest enables communication
across the entire organization.
Set up your computers according to the manufacturer’s instructions. Then install online MCTS certification, Enterprise Edition according to the instructions provided below.

Read more on The Readiness Review Suite…

Each chapter of Part 1 identifies the exam objectives that are covered within the chap-ter, provides an online MCTS certification overview of why the topics matter by identifying how the information applies in the real world, and lists any prerequisites that must be met to complete the lessons presented in the chapter.
The chapters are divided into lessons. Lessons contain practices made up of one or more hands-on exercises. These exerices give you an opportunity to use the skills being presented or explore the part of the application being described. Each lesson also has a set of review questions to test your knowledge of the material covered in that lesson.
After the lessons, you are given an opportunity to apply 70-620 exam cost what you’ve learned in a case scenario exercise. In this exercise, you work through a multi-step solution for a realistic case scenario. You are also given an opportunity to work through a troubleshooting lab that explores difficulties you might encounter when applying what you’ve learned on the job.
Each chapter ends with a short summary of key concepts and a short section listing key topics and terms that you need to know before taking the exam, summarizing the key learnings with a foucs on the exam.
The use of “Windows Server 2003 family” and “Windows Server 2003″ refers to the family of four products: Microsoft Windows Server 2003, Standard Edi?tion; Microsoft Windows Server 2003, Enterprise Edition; Microsoft Windows Server 2003, Datacenter Edition; and Microsoft Windows Server 2003, Web Edition. However, Windows Server 2003, Web Edition, only partially supports the use of Active Directory. Windows Server 2003, Web Edition, can participate as a member server in an Active Directory-enabled network, but it cannot be used as an Active Directory domain controller.
You will find sidebars like this one that contain related information you might find helpful. “Real World” sidebars contain specific information gained through the free Microsoft IT certification test questions experience of IT professionals just like you.

Read more on Learn at Your Own Pace…